Dell PowerEdge M600 - Manual (Page 604)

608 IGMP Proxy Commands
www
.dell.com | support.dell.com
Syntax
ip igmp-proxy reset-status
Default Configuration
This command has no default configuration.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.
Example
The following example resets the host interface status parameters of the IGMP Proxy router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy reset-status
ip igmp-proxy unsolicited-report-interval
Use the ip igmp-proxy unsolicited-report-interval command in Interface Configuration mode to
set the unsolicited report interval for the IGMP Proxy router. This command is valid only if IGMP
Proxy on the interface is enabled.
Syntax
ip igmp-proxy unsolicited-report-interval seconds
• seconds—Unsolicited report interval. (Range: 1-260 seconds)
Default Configuration
The default configuration is 1 second.
Command Mode
Interface Configuration (VLAN) mode
User Guidelines
This command has no user guidelines.