Dell PowerEdge M600 - Manual (Page 412)

402 Radius Commands
www
.dell.com | support.dell.com
Default Configuration
The default value is 3 seconds.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before executing this
command.
Example
The following example specifies the timeout setting for the designated Radius Server.
console(config)#radius-server host 192.143.120.123
console(config-radius)#timeout 20
usage
Use the usage command in Radius mode to specify the usage type of the server.
Syntax
usage type
• type—Variable can be one of the following values: login, 802.1x or all.
Default Configuration
The default variable setting is all.
Command Mode
Radius mode
User Guidelines
User must enter the mode corresponding to a specific Radius server before executing this
command.
Example
The following example specifies usage type login.
console(config)#radius-server host 192.143.120.123
console(config-radius)#usage login