Dell PowerEdge M600 - Manual (Page 270)

248 System Management Commands
www
.dell.com | support.dell.com
Syntax
cut-through mode
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration
User Guidelines
No specific guidelines.
Example
console(config)#cut-through mode
The mode (enable) is effective from the next reload of
Switch/Stack.
hostname
Use the hostname command in Global Configuration mode to specify or modify the switch host
name. To restore the default host name, use the no form of the command.
Syntax
hostname name
no hostname
• name—The name of the host. (Range: 1 - 255 characters)
Default Configuration
Host name not configured.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example specifies the switch host name.
console(config)# hostname Dell