Dell PowerEdge M600 - Manual (Page 526)

522 VLAN Commands
www
.dell.com | support.dell.com
show switchport protected
Use the show switchport protected command in Privileged EXEC mode to display the status of all
the interfaces, including protected and unprotected interfaces.
Syntax
show switchport protected groupid
• groupid—Identifies which group the port is to be protected in. (Range: 0-2)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example identifies test as the protected group.
console#show switchport protected 0
Name......................................... test
show vlan
Use the show vlan command in Privileged EXEC mode to display VLAN information.
Syntax
show vlan [id vlan-id | name vlan-name]
• vlan-id—A valid VLAN ID.
• vlan-name—A valid VLAN name string. (Range: 1 - 32 characters)
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.