Dell PowerEdge M600 - Manual (Page 591)

IGMP Commands 595
IGMP Commands
ip igmp
Use the ip igmp command in Global Configuration mode to set the administrative mode of IGMP
in the system to active.
Syntax
ip igmp
no ip igmp
Default Configuration
Disabled is the default state.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example globally enables IGMP.
console(config)#ip igmp
ip igmp last-member-query-count
Use the ip igmp last-member-query-count command in Interface Configuration mode to set the
number of Group-Specific Queries sent before the router assumes that there are no local members
on the interface.