Dell PowerEdge M600 - Manual (Page 590)

592 DVMRP Commands
www
.dell.com | support.dell.com
Example
The following example displays the table that lists the router’s upstream prune information.
console(config)#show ip dvmrp prune
Expiry
Group IP Source IP Source Mask Time(secs)
--------------- --------------- --------------- --------------
show ip dvmrp route
Use the show ip dvmrp route command in Privileged EXEC mode to display the multicast routing
information for DVMRP.
Syntax
show ip dvmrp route
Default Configuration
This command has no default condition.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays the multicast routing information for DVMRP.
console#show ip dvmrp route
Upstream Expiry Up Time
Source Address Neighbor Interface Metric Time(secs) (secs)
-------------- -------- ---------------- ---------- ---------