Dell PowerEdge M600 - Manual (Page 607)

IGMP Proxy Commands 611
Ver Query Rcvd Report Rcvd Report Sent Leave Rcvd Leave Sent
-----------------------------------------------------------------
1 0 0 0 ----- -----
2 0 0 0 0 0
3 0 0 0 ----- -----
show ip igmp-proxy groups
Use the show ip igmp-proxy groups command in Privileged EXEC mode to display a table of
information about multicast groups that IGMP Proxy reported. It displays status parameters only
when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy groups
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example attempts to display a table of information about multicast groups that
IGMP Proxy reported.
console#show ip igmp-proxy groups
Interface Index................................ vlan13
Group Address Last Reporter Up Time Member State Filter Mode Sources
------------- --------------- ------- ------------ ----------- ------ -
225.0.1.1 13.13.13.1 7 DELAY-MEMBER Exclude 0
225.0.1.2 13.13.13.1 48 DELAY-MEMBER Exclude 0