Dell PowerEdge M600 - Manual (Page 660)

666 Multicast Commands
www
.dell.com | support.dell.com
Syntax
show ip mcast boundary {vlan vlan-id | all}
• vlan-id—Valid VLAN ID.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays all the configured administrative scoped multicast
boundaries.
console#show ip mcast boundary all
MULTICAST BOUNDARY
Interface Group Ip Mask
--------- --------------- ---------------
show ip mcast interface
Use the show ip mcast interface command in Privileged EXEC mode to display the multicast
information for the specified interface.
Syntax
show ip mcast interface {vlan vlan-id | all}
• vlan-id—Valid Ethernet port
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.