Dell PowerEdge M600 - Manual (Page 237)

Link Dependency Commands 209
• intf-list—List of Ethernet interfaces. Separate nonconsecutive ports with a comma and
no spaces. Use a hyphen to designate the range of ports. (Range: Valid Ethernet interface
list or range)
Command Mode
Link Dependency mode
Default Configuration
This command has no default configuration.
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#no add ethernet g1
add port-channel
Use the add port-channel command to add member port-channels to the dependency list.
Syntax
add port-channel port-channel-list
• port-channel-list—List of port-channel interfaces. Separate nonconsecutive ports with a
comma and no spaces. Use a hyphen to designate the range of ports. (Range: Valid port-
channel interface list or range)
Default Configuration
This command has no default configuration.
Command Mode
Link Dependency mode
User Guidelines
No specific guidelines
Example
console(config-linkDep-group-1)#add port-channel 2