Dell PowerEdge M600 - Manual (Page 188)

156 Ethernet Configuration Commands
www
.dell.com | support.dell.com
show interfaces configuration
Use the show interfaces configuration command in User EXEC mode to display the configuration
for all configured interfaces.
Syntax
show interfaces configuration [ethernet interface | port-channel port-channel-number ]
• interface—Valid Ethernet port.
• port-channel-number—Valid port-channel index.
Default Configuration
This command has no default configuration.
Command Modes
User EXEC mode
User Guidelines
This command has no use guidelines.
Example
The following example displays the configuration for all configured interfaces:
console>show interfaces configuration
Port Type Duplex Speed Neg MDIX Admin
Mode State
----- ----------------- ------ ------- ---- ---- -----
1/g1 Gigabit - Level Full 100 Auto Auto Up
1/g2 Gigabit - Level Full 100 Auto Auto Up
1/g3 Gigabit - Level Full 100 Auto Auto Up
The displayed port configuration information includes the following: