Dell PowerEdge M600 - Manual (Page 207)

GVRP Commands 177
Default Configuration
By default, dynamic VLAN creation is enabled.
Command Mode
Interface Configuration (Ethernet, Port-Channel) mode
User Guidelines
This command has no user guidelines.
Example
The following example disables dynamic VLAN creation on port 1/g8.
console(config)#interface ethernet 1/g8
console(config-if-1/g8)#gvrp vlan-creation-forbid
show gvrp configuration
Use the show gvrp configuration command in Privileged EXEC mode to display GVRP
configuration information. Timer values are displayed. Other data shows whether GVRP is enabled
and which ports are running GVRP.
Syntax
show gvrp configuration [ethernet interface | port-channel port-channel-number]
• interface—A valid Ethernet interface.
• port-channel-number—A valid port-channel index.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to display GVRP configuration information: