Dell PowerEdge M600 - Manual (Page 508)

504 TACACS+ Commands
www
.dell.com | support.dell.com
• port-number—The server port number. If left unspecified, the default port number is 49.
(Range: 0 - 65535)
Default Configuration
The default port number is 49.
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example displays how to specify server port number 1200.
console(tacacs)#port 1200
priority
Use the priority command in TACACS Configuration mode to specify the order in which servers
are used, where 0 (zero) is the highest priority.
Syntax
priority priority
• priority—Specifies the priority for servers. 0 (zero) is the highest priority. (Range: 0 -
65535)
Default Configuration
If left unspecified, this parameter defaults to 0 (zero).
Command Mode
TACACS Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example shows how to specify a server priority of 10000.
console(config-tacacs)#priority 10000