Dell PowerEdge M600 - Manual (Page 524)

520 VLAN Commands
www
.dell.com | support.dell.com
The following example displays switchport configuration individually for 1/g2.
console#show interface switchport ethernet 1/g2
Port 1/g2:
VLAN Membership mode: General
Operating parameters:
PVID: 4095 (discard vlan)
Ingress Filtering: Enabled
Acceptable Frame Type: All
Port 1/g1 is member in:
VLAN Name Egress rule Type
---- --------- ----------- -----
91 IP Telephony tagged Static
Static configuration:
PVID: 8
Ingress Filtering: Disabled
Acceptable Frame Type: All
Port 1/g2 is statically configured to:
VLAN Name Egress rule
---- --------- -----------
8 VLAN0072 untagged
91 IP Telephony tagged
Forbidden VLANS:
VLAN Name
---- ---------
73 Out
The following example displays switchport configuration individually for 2/g19.
console#show interfaces switchport ethernet 2/g19
Port 2/g19:
Operating parameters:
PVID: 2922
Ingress Filtering: Enabled
Acceptable Frame Type: Untagged
GVRP status: Disabled
Port 2/g19 is member in:
VLAN Name Egress rule Type
---- --------- ----------- -----
2921 Primary A untagged Static
2922 Community A1 untagged Static