Dell PowerEdge M600 - Manual (Page 198)

166 Ethernet Configuration Commands
www
.dell.com | support.dell.com
Packets Transmitted Without Errors............. 91652
Unicast Packets Transmitted.................... 2746
Multicast Packets Transmitted.................. 88892
Broadcast Packets Transmitted.................. 14
Transmit Packets Discarded..................... 0
--More-- or (q)uit
Most Address Entries Ever Used................. 141
Address Entries Currently in Use............... 124
Maximum VLAN Entries........................... 1024
Most VLAN Entries Ever Used.................... 6
Static VLAN Entries............................ 6
Dynamic VLAN Entries........................... 0
VLAN Deletes................................... 0
Time Since Counters Last Cleared............... 1 day 0 hr 42 min
13 sec
console#
show storm-control
Use the show storm-control command in Privileged EXEC mode to display the configuration of
storm control.
Syntax
show storm-control [all |interface]
• interface—Valid Ethernet port.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.