Dell PowerEdge M600 - Manual (Page 200)

168 Ethernet Configuration Commands
www
.dell.com | support.dell.com
The following example re-enables ethernet port 1/g5.
console(config)#interface ethernet 1/g5
console(config-if-1/g5)# no shutdown
speed
Use the speed command in Interface Configuration mode to configure the speed of a given
Ethernet interface when not using auto-negotiation. To restore the default, use the no form of this
command.
Syntax
speed [10 | 100 | 1000]
no speed
• 10—Configures the port to 10 Mbps operation.
• 100—Configures the port to 100 Mbps operation.
• 1000—Configures the port to 1000 Mbps operation.
Default Configuration
This command has no default setting.
Command Mode
Interface Configuration (Ethernet) mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the speed operation of Ethernet port 1/g5 to force 100-
Mbps operation.
console(config)#interface ethernet 1/g5
console(config-if-1/g5)#speed 100