Dell PowerEdge M600 - Manual (Page 573)

DHCPv6 Commands 573
DHCPv6 Commands
clear ipv6 dhcp
Use the clear ipv6 dhcp command in Privileged EXEC mode to clear DHCPv6 statistics for all
interfaces or for a specific interface.
Syntax
clear ipv6 dhcp {statistics | interface vlan vlan-id statistics}
• vlan-id—Valid VLAN ID.
• statistics—Indicates statistics display if VLAN is specified.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Examples
The following examples clears DHCPv6 statistics for VLAN 11.
console#clear ipv6 dhcp interface vlan 11 statistics
dns-server
Use the dns-server command in IPv6 DHCP Pool Configuration mode to set the ipv6 DNS server
address which is provided to a DHCPv6 client by the DHCPv6 server. DNS server address is
configured for stateless server support.
Syntax
dns-server dns-server-address