Dell PowerEdge M600 - Manual (Page 739)

OSPFv3 Commands 745
Syntax
show ipv6 ospf area areaid
• areaid—Identifier for the OSPF area being displayed.
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.
Example
The following example displays information about area 1.
console#show ipv6 ospf area 1
AreaID......................................... 0.0.0.1
External Routing............................... Import External
LSAs
Spf Runs....................................... 0
Area Border Router Count....................... 0
Area LSA Count................................. 0
Area LSA Checksum.............................. 0
Stub Mode...................................... Disable
Import Summary LSAs............................ Enable
show ipv6 ospf asbr
This command displays the internal OSPFv3 routes to reach Autonomous System Boundary
Routes (ASBR). This command takes no options.
Syntax
show ipv6 ospf asbr
Default Configuration
This command has no default configuration.