Dell PowerEdge M600 - Manual (Page 315)

Line Commands 297
User Guidelines
This command has no user guidelines.
Example
The following example configures the command history buffer size to 20 commands for the
current terminal session.
console(config-line)#history size 20
line
Use the line command in Global Configuration mode to identify a specific line for configuration
and enter the line configuration command mode.
Syntax
line {console|telnet|ssh}
• console—Console terminal line.
• telnet—Virtual terminal for remote console access (Telnet).
• ssh—Virtual terminal for secured remote console access (SSH).
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Examples
The following example enters Line Configuration mode to configure Telnet.
console(config)#line telnet
console(config-line)#
show line
Use the show line command in User EXEC mode to display line parameters.
Syntax
show line [console|telnet|ssh]