Dell PowerEdge M600 - Manual (Page 191)

Ethernet Configuration Commands 159
Deferred Transmissions: 0
Late Collisions: 0
Excessive Collisions: 0
Oversize Packets: 0
Internal MAC Rx Errors: 0
Received Pause Frames: 0
Transmitted Pause Frames: 0
The following table describes the fields shown in the display:
Field Description
InOctets Counted received octets.
InUcastPkts Counted received Unicast packets.
InMcastPkts Counted received Multicast packets.
InBcastPkts Counted received Broadcast packets.
OutOctets Counted transmitted octets.
OutUcastPkts Counted transmitted Unicast packets.
OutMcastPkts Counted transmitted Multicast packets.
OutBcastPkts Counted transmitted Broadcast packets.
Alignment Errors A count of frames received that are not an integral number of octets in
length and do not pass the FCS check.
FCS Errors Counted frames received that are an integral number of octets in length
but do not pass the FCS check.
Single Collision Frames Counted frames that are involved in a single collision, and are
subsequently transmitted successfully.
Multiple Collision Frames A count of frames that are involved in a multiple collision, and are
subsequently transmitted successfully
Deferred
Transmissions
A count of frames for which the first transmission attempt is delayed
because the medium is busy
Late Collisions Counted times that a collision is detected later than one slot time into
the transmission of a packet.
Excessive Collisions Counted frames for which transmission fails due to excessive collisions.
Oversize Packets Counted frames received that exceed the maximum permitted frame
size.
Internal MAC Rx Errors A count of frames for which reception fails due to an internal MAC
sublayer receive error.