Dell PowerEdge M600 - Manual (Page 114)

76 Using the CLI
www
.dell.com | support.dell.com
Copyright 1984-2002 Wind River Systems, Inc.
CPU: Motorola E500 : Unknown system version
Runtime Name: VxWorks
Runtime Version: 5.5.1
BSP version: 1.2/0
Created: Feb 8 2006, 16:40:43
WDB Comm Type: WDB_COMM_NETWORK
WDB: Ready.
Timebase: 66.666666 MHz, MEM: 266.666664 MHz, PCI: 66.666666 MHz,
CPU:
533.33332
8 MHz
SOC unit 0 attached to PCI device BCM56304_B0
SOC unit 1 attached to PCI device BCM56304_B0
Adding BCM transport pointers
Configuring CPUTRANS TX
Configuring CPUTRANS RX
st_state(0) = 0x0
st_state(1) = 0x4
st_state(2) = 0x2
(Unit 1)>STACK: master on 0:2:bc:0:30:66 (1 cpu, 2 units)
STACK: attach 2 units on 1 cpu
This switch is manager of the stack.
User:
Boot Utility Menu
If a user is connected through the serial interface during the boot sequence, pressing the
key interrupts the boot process and displays a Boot Utility Menu. Selecting item 2 displays the
menu and may be typed only during the initial boot up sequence. Once the system boot up is
complete, typing the escape sequence does not display the menu.