Dell PowerEdge M600 - Manual (Page 279)

System Management Commands 257
Default Configuration
This command has no default configuration.
User Guidelines
No specific guidelines.
Example
Console#show cut-through mode
Current mode : Enable
Configured mode : Disable (This mode is effective on next reload)
show ip interface out-of-band
Use the show ip interface out-of-band command to disable DHCP/BOOTP on the OOB port.
Syntax
show ip interface out-of-band
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC
User Guidelines
No specific guidelines.
Example
console#show ip interface out-of-band
IP Address............................ 10.240.4.115
Subnet Mask........................... 255.255.255.0
Default Gateway....................... 10.240.4.1
IPv6 Prefix is ....................... FE80::20A:1EFF:FE11:1100/64
ServPort Configured Protocol Current...None
Burned In MAC Address..................0006.2932.814C