Dell PowerEdge M600 - Manual (Page 577)

DHCPv6 Commands 577
• option—Agent information option. (Range: 32-65535)
Default Configuration
32 is the default value for option.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the number 100 to represent the DHCPv6 Relay Agent
Information Option.
console(config)#ipv6 dhcp relay-agent-info-opt 100
ipv6 dhcp relay-agent-info-remote-id-subopt
Use the ipv6 dhcp relay-agent-info-remote-id-subopt command in Global Configuration mode to
configure a number to represent the DHCPv6 the “remote-id” sub-option.
Syntax
ipv6 dhcp relay-agent-info-remote-id-subopt suboption
• suboption—Remote ID suboption. (Range: 1-65535)
Default Configuration
1 is the default value for suboption.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example configures the number 100 to represent the DHCPv6 the “remote-id”
sub-option.
console(config)#ipv6 dhcp relay-agent-info-remote-id-subopt 100