Dell PowerEdge M600 - Manual (Page 605)

IGMP Proxy Commands 609
Example
The following example sets 10 seconds as the unsolicited report interval for the IGMP Proxy
router.
console(config)#interface vlan 15
console(config-if-vlan15)#ip igmp-proxy unsolicited-report-
interval 10
show ip igmp-proxy
Use the show ip igmp-proxy command in Privileged EXEC mode to display a summary of the host
interface status parameters. It displays status parameters only when IGMP Proxy is enabled.
Syntax
show ip igmp-proxy
Default Configuration
This command has no default configuration.
Command Mode
Privileged EXEC mode
User Guidelines
This command has no user guidelines.