Dell PowerEdge M600 - Manual (Page 767)

PIM-SM Commands 775
Syntax
ip pimsm staticrp ipaddr groupaddr groupmask
no ip pimsm staticrp ipaddr groupaddr groupmask
• ipaddr—IP address of RP.
• groupaddr—Group IP address supported by RP.
• groupmask—Group subnet mask for group address.
Default Configuration
This command has no default configuration.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.
Example
The following example create RP IP address for the PIM-SM router.
console(config)#ip pimsm staticrp 10.1.1.1 224.5.5.5
255.255.255.255
ip pim-trapflags
Use the ip pim-trapflags command in Global Configuration mode to enable the PIM trap mode
for both Sparse Mode (SM) and Dense Mode (DM).
Syntax
ip pim-trapflags
no ip pim-trapflags
Default Configuration
Disabled is the default state.
Command Mode
Global Configuration mode
User Guidelines
This command has no user guidelines.