Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 43)

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 43
The Enpac 2500 Data Collector Chapter 1
The Config function should remain on the screen for approximately three
seconds after releasing the 0 key.
3. Press F4 (Config) to display the data collection options.
The Instrument Configuration screen appears.
4. Review the default values and edit if necessary.
5. When you are finished, press F4 (Apply) to return to the Data Collection
screen.