Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 29)

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 29
The Enpac 2500 Data Collector Chapter 1
Powering on the Enpac The ON/OFF key powers the Enpac 2500 on and off. A single press of the key
powers on the data collector. However, to power off the Enpac 2500, press the
ON/OFF key for a period of one second. The Enpac 2500 resumes operation at
the last screen you viewed when you powered off the unit.
Enpac 2500 Screens This section introduces you to the main screens that appear when operating the
Enpac 2500. There are many other screens that appear while operating the Enpac
2500. These screen are described with the operation.
Main Menu
The Main Menu allows you to navigate to the different programs in the Enpac
2500. Each option in the Main Menu allows you to complete different tasks, such
as collecting data, defining the setup options, and reviewing data.
To make a selection from the Main Menu, highlight the option by using the
arrow keys and press either of the READ/OK keys.
TIP The first time you power on the Enpac 2500 or following a reset, the
Instrument Setup screen automatically appears in the display.
Refer to Set the Date, Time, and Date Format on page 32 .
Bump Test, Balancing, Recorder
and RUCD are optional
applications.