beautypg.com

Set up computer communication options in emonitor – Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector User Manual

Page 101

background image

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012

101

Loading and Unloading

Chapter 3

Set Up Computer Communication Options in Emonitor

Before you can load a list into the Enpac 2500, you must first set up the computer
communication options in Emonitor. Once you select these communication
options, you should not have to change them again unless you change your
computer hardware.

1.

Choose Tools > Load/Unload.

2.

Click the large Set Up Computer button in the Load/Unload dialog.

The Set Up Computer dialog appears.

3.

Select your Communications Device such as COM1, COM2 or USB.

Refer to Using the USB Port on page 103

for information on how to

connect your computers USB port.

4.

Click OK when you are finished.

This manual is related to the following products:
See also other documents in the category Rockwell Automation Equipment: