Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 170)

170 Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012
Chapter 6 Multi-channel Measurements
Follow these steps to display the view options for orbit measurements.
1. Press 0 (Shift) to display the second set of functions.
2. Press F4 (View).
3. Select an options and click Apply.
4. Use the Left and Right arrows to move the frequency cursor.
5. Use the Up and Down arrows to move the amplitude cursor.
The Y-axis and X-axis are synchronized, which means the cursors are in the
same position on each trace in the spectrum. The X and Y axis will move
together, and magnify as the display is expanded.
6. Press the +/- key to expand and compress the time waveform spectrum
plot.
7. If desired, press F3 (Notes) to assign inspection codes to each point.
The Enpac 2500 unloads the inspection codes when you unload the
unscheduled data to the Emonitor software.
See Inspection Codes and the Data Collector on page 96 for more
information.
8. Once the Enpac 2500 collects the measurement, press Enter to accept the
measurement.
9. When you are finished viewing the data, press Enter or press F4 (Esc) to
return to the Data Collection screen.