Rockwell Automation 1441-PEN25-Z Enpac 2500 Data Collector - Manual (Page 153)

Rockwell Automation Publication GMSI10-UM002D-EN-E - August 2012 153
Collecting and Reviewing Data Chapter 4
Review Data
The Review Data screen lets you view the four types of measurements.
• Spectrum
• Time waveform
• Magnitude and phase orders
• Overall value
Follow these steps to the review data.
1. From the Route Manager, select a route and press Enter.
2. Press F1 (Review).
The Review Data screen appears.
3. Press F2 (Next) or F1 (Previous) to move back and forth through the
review data screens.
Follow these steps to view the Current Point Info. screen.
1. From the Route Manager screen, select a route and Press Enter.
2. Press Enter to start the measurement.
3. Press 0 (Shift).
Current Signal
Amplitude
Full Scale Range
Last Recorded Value
% Changed from Last
Recorded Value to the
Current Reading