Other parameters – Apple Logic Express 7 User Manual
Page 494

494
Chapter 21
Control Surface Support
Other Parameters
Track Name Format
Changes the track name display to show the track name alone, or the track name, and
it’s track number. As an example, a track named “Audio1” may actually be placed on
track 12 in the Arrange window. When a value of #:Name is toggled, “Audio1” would be
displayed as “12:Au1”.
Parameter Page Shift Mode
Defines whether the parameter is shifted by an entire “page” or by one parameter.
Relative Change Mode
This determines the behavior of assignments with a relative value change mode (e.g.
rotary encoders).
•
Coarse: the parameter can be adjusted in coarse steps.
•
Full: the parameter value is set to its minimum if delta < 0. If greater than 0, it is set
to the maximum. This way, you can jump to the last or first track instead of the next
or previous bank.
•
Fine: the value is incremented/decremented in fine steps—one tick/by one “unit”. In
this mode, the adjustable resolution is ignored, and the highest possible resolution is
used instead. As an example, using the Sample Delay parameter: every encoder
rotation tick in/decreases the value by 1 ms, no matter what the value of the
resolution.
Coarse is the mode used by default.
Mix Group
When in Group Edit mode, this parameter defines the edited group.
Group Parameter Page
As with Instrument Parameter Page, but for the parameters of the edited group.