Apple Logic Express 7 - Manual (Page 441)

Chapter 16 The Transform Window 441
The All setting in the top box means that all values fulfil the conditions, making all
other boxes in the same column superfluous.
Conditions for the Status
You have a choice of just two settings here, All (means all event types fulfil the
condition) and “=”. Clicking in the box below opens a pull-down menu, where you can
select; note, poly pressure, control change, program change, channel pressure, or pitch
bend.
Conditions for the values of Position, Cha, -1-/Pitch, -2-/Vel, Length, and
Subposition
You can assign one of the following value conditions for each of the parameters
(except the status):
“=”
The value in the event and the box below it must be equal, for the condition to be
fulfilled.
Unequal
The value in the event and the box below it must be unequal, for the condition to be
fulfilled.
Smaller
The value in the event must be smaller than the value in the box below it, for the
condition to be fulfilled.
Larger
The value in the event must be larger than the value in the box below it, for the
condition to be fulfilled.
Inside
The value in the event must be within the value range of both boxes below it, for the
condition to be fulfilled.
Outside
The value in the event must be outside the value range of both boxes below it, for the
condition to be fulfilled.