HP StoreEver TapeAssure Software - Manual (Page 69)

Using the device information screen
When you first select a product from the Main screen, the device information screen opens, showing
information relevant to the device.
The main purpose of the device information screen is to provide an overview of the configuration
and status of the selected hardware device.
From the Main screen, type the following command to access the device information screen:
select <n> (where <n> is the number of the device to be examined)
NOTE: Alternatively, you can omit the select command and enter only the device number.
Standalone devices
Figure 31 Device information screen for a standalone device
The following general information is displayed:
•
Product ID (inquiry string)
•
Drive technology
•
Mech. serial # (drive serial number)
•
Firmware revision
•
SCSI target ID
•
SCSI LUN
•
OBDR capability (if present)
If a data cartridge was inserted in the drive when the device information screen was displayed,
information regarding cartridge type, capacity, and write-protect status is shown.
To see a list of compatible media that can be used with this device, use the cartridge command.
Using the command screen interface (CSI) 69