beautypg.com

HP StoreEver TapeAssure Software User Manual

Page 102

background image

Read check

Review new events

Newer test

Requires that cartridge be already loaded or in the process of
loading when the test is started.

Looks at the drive history (runs device analysis and looks for at DDS
report information).

Checks whether the drive is requesting cleaning.

Write 1GB of data for DAT72 and below and 2GB of data for
DAT160 and above and then measures the write margin.

Read 1GB of data for DAT72 and below and 2GB of data for
DAT160 and above and then measures the read margin

1/8 Autoloader Assessment tests performed:

Review robotics error log entries

Run appropriate drive assessment test on the drive

Check for new robotics error log entries

Perform 12 to 24 drive loads and unloads (depending on drive
type)

Check for new robotics error log entries

Test names

LTO Drive Assessment test

SDLT Drive Assessment Test

DDS Drive Assessment Test

Options

LTO Assessment test options:

For the LTO test, the following four options are available:

Allow Overwrite

(defaults to FALSE) — set to TRUE to avoid

the interactive warning about erasing data on the test tape

Test Coverage

(defaults to DEFAULT, which is two wraps) — A

wrap is one full length of the tape in one direction. ‘2X' test
coverage is twice the default (4 wraps) and ‘4X' test coverage is
four times the default (8 wraps). Typical test times for
‘Default'/2X/4X test coverage options are 15/30/60 minutes.

SDLT Assessment test options:

Media Test

(defaults to FALSE) — writes and reads, looking for

tape errors, including servo errors

Allow Overwrite

(defaults to FALSE) — set to TRUE to avoid

the pop-up warning about erasing data on the test tape

DDS Assessment test options:

NOTE:

L&TT versions 4.8 and above have two versions of the DDS

Assessment test. L&TT will offer the test applicable to your tape drive.

Original test

Allow Overwrite

(defaults to FALSE) — set to TRUE to avoid

the pop-up warning about erasing data on the test tape

Newer test

102 Tests and utility functions

This manual is related to the following products: