Why doesn't l&tt for tru64 see some of my devices, Why doesn't l&tt for linux see some of my devices, Why does l&tt for tru64 not see some of my devices – HP StoreEver TapeAssure Software User Manual
Page 191: Why does l&tt for linux not see some of my devices
large number of devices and disks, HP recommends setting maxfiles larger than 2048 ,
depending on the SAN size. Use the commands kmtune or kctune to configure maxfiles.
Why am I unable to download firmware/script files using the download option in
the CSI (HP-UX, Linux)?
If your network is protected by a firewall and web proxy, you must first specify the proxy server
name and port name using the Preferences screen.
Why doesn't L&TT for Tru64 see some of my devices?
Whenever you connect or remove a device, you must reconfigure the CAM and hardware manager
layers. Furthermore, Tru64 does not support hot swapping of SCSI devices. To reconfigure the
CAM and hardware manager layers:
1.
Close L&TT.
2.
Use the following command to check for stale devices:
/sbin/hwmgr show scsi -full | grep stale
3.
Remove any stale devices. If you are not sure whether a device is stale or not, remove it
anyway. Devices can be rediscovered later. Use the following command to remove a device:
/sbin/hwmgr -delete scsi -did
<SCSI ID>
4.
Rescan the SCSI bus.
/sbin/hwmgr scan scsi
5.
Rescan the CAM layer.
/sbin/scu scan edt
6.
Run the following commands to verify the SCSI devices:
/sbin/hwmgr show scsi
/sbin/scu show edt
7.
Restart L&TT.
Why doesn't L&TT for Linux see some of my devices?
To detect a surrogate SCSI device, you must configure the modules.conf file for the new device
you have connected. After modifying this file, reboot the computer so that the new device is
recognized by the scsi/sg layer. Linux does not support hot swapping of SCSI devices. To
reconfigure the modules.conf file:
1.
Login as root.
2.
Edit the following file:
vi /etc/modules.conf
3.
Add the following line as appropriate:
add options scsi_mod max_scsi_luns=128
4.
Reboot the computer.
Why doesn't L&TT for Windows see devices that are connected to a computer running
HP-UX?
L&TT does not support a client-server model such as the HP-UX Support Tools Manager. You cannot
use L&TT on a Windows workstation to view devices that are connected to a computer running
HP-UX.
CSI questions
191