HP StoreEver TapeAssure Software User Manual
Page 170
1.
Select Run Utilities from the Utilities menu to display the Run Utilities dialog.
Figure 73 Run Utilities dialog
2.
Select the utility from the Utility drop-down list.
3.
Click the Options button to set any utility options.
The device independent utilities do not require a tape device to be connected to the system
running L&TT.
To run a device connection independent utility from the command line interface:
1.
On the main screen, enter the command utils.
2.
On the Utilities screen, the system independent utilities supported on that operating system
will be listed.
Figure 74 System independent utilities
3.
Enter the number of the test you want to run.
4.
In the test screen, enter the command testoptions to set the options for the test.
5.
Enter the command start to run the test.
6.
When the test is completed, the test results are displayed on a review screen.
170
Additional functionality