HP StoreEver TapeAssure Software - Manual (Page 66)

•
For Novell NetWare
From the server console, execute the following command:
hp_ltt\hp_ltt
•
For HP OpenVMS:
Log on as system or an ALL privileged user and execute the command
@LTT$ROOT:[000000]start_ltt.com
•
For Mac OS:
Bring up the terminal. Change the working directory to /usr/local/HP/LTT and initialize
L&TT by running the command ./hp_ltt.
Alternatively running the command hp_ltt would also initialize L&TT from any working
directory.
Navigating the screens
The top line of each screen displays the current screen name in hierarchical format. Each level of
screens is separated by the “>” character. On each screen, some of the available commands take
you to a lower level in the hierarchy. To move back to the previous level, use the up command.
To exit L&TT, use the exit command.
On most of the screens, entering a blank command (pressing Enter without typing any other text)
displays a Command Help screen. This screen contains a list of valid commands that can be
executed on the screen from which the Command Help screen was accessed.
Figure 27 Command Help screen accessed from the Main screen
You can enter a command directly from the Command Help screen. To do this, type either the
number of the command or the name of the command and press Enter. Entering the number of the
command only works on the Command Help screen. From any other screen, you must type the full
name of the command. To exit the Command Help screen, enter a blank command (press Enter).
66 Installing and using L&TT on non-Windows systems