GW Instek PEL-2000 Series User Manual - Manual (Page 92)

PEL-2000 Series User Manual
92
Run  Active Channel
(CH01~08)
CHAN  Mode
 Range
 Static/Dynamic
 CV response
speed
Go/NoGo  SPEC Test
 High
 Center
 Entry Mode
 Low
Save: Internal
memory When saving data to internal memory, either the
current channel or all the channel data can be
saved. Not all data types can save the current
channel or all the channel data.
Data Type
Current Ch All Ch
Preset • •
Memory • ─
SEQ • (single save) •
Setup ─ •
Save: External
memory Only SEQ, Memory and Preset data can be saved
for a single channel to USB. All four data types
(SEQ, Memory, Setup, Preset) can save all channels
to USB.
Data Type
Current Ch All Ch
Preset • •
Memory • •
SEQ • •
Setup ─ •