GW Instek PEL-2000 Series User Manual - Manual (Page 122)

PEL-2000 Series User Manual
122
Select CC Mode
Background The PEL 2000 series load generators operate in
three different modes: Constant Current (CC),
Constant Resistance (CR), and Constant Voltage
(CV).
When a channel is active, the F1
key can be used to switch
between each operating mode.
Mode
CC
Mode
CR
Mode
CV
Panel Operation 1. Select a channel using the
CHAN button and selector knob.
2. Press F1 repeatedly until CC
mode is displayed in the display
panel.
Changing the operating mode will only affect the
current (active) channel. Other channels will not be
affected by any changes.