GW Instek PEL-2000 Series User Manual - Manual (Page 54)

PEL-2000 Series User Manual
54
Frame Link Connection
Background Frame link control involves connecting multiple
mainframes using the frame link connections. Up
to 4 slave mainframes can be connected to the
master mainframe. The first mainframe (master)
can be used to control the other slave frames.
There is a delay time of 2ms between the master
and first slave mainframe, and 4ms, 6ms, and 8ms
to the second, third, and fourth slave mainframes,
respectively. The connectors used are standard
MIL 20-pin connectors. For pin arrangement see
page 236.
Frame Link
Connection
AWG 24
STRIP GAUGE 10.0 mm
1
CH CONT 1
1
CH CONT 2
1
CH CONT 3
1
CH CONT 4
1
CH CONT 5
1
CH CONT 6
1
CH CONT 7
1
CH CONT 8
SER. NO. LB
2
1
FRAME CONT
GO / NG OUTPUT GPIB
RS232C
DISCONNECT POWER CORD
BEFORE REPLACING FUSE
50/60 Hz 180 VA MAX
AC
250V T 3.15A
REPLACE FUSE
115V
230V FUSE RATING
AS SPECIFIED
WARNING
TO AVOID ELECTRIC SHOCK THE POWER CORD PROTECTIVE
DO NOT REMOVE COVERS. REFER SERVICING TO QUALIFIED PERSONNEL.
250V FUSE OF THE SPECIFIED TYPE AND RATING. FOR CONTINUED FIRE PROTECTION. REPLACE FUSE ONLY WITH
NO OPERATOR SERVICEABLE COMPONENTS INSIDE.
GROUNDING CO NDUCTOR MUST BE CONNECTED TO GROUND.
AWG 24
STRIP GAUGE 10.0 mm
1
CH CONT 1
1
CH CONT 2
1
CH CONT 3
1
CH CONT 4
1
CH CONT 5
1
CH CONT 6
1
CH CONT 7
1
CH CONT 8
SER. NO. LB
2
1
FRAME CONT
GO / NG OUTPUT GPIB
RS232C
DISCONNECT POWER CORD
BEFORE REPLACING FUSE
50/60 Hz 180 VA MAX
AC
250V T 3.15A
REPLACE FUSE
115V
230V FUSE RATING AS SPECIFIED
WARNING
TO AVOID ELECTRIC SHOCK THE POWER CORD PROTECTIVE
DO NOT REMOVE COVERS. REFER SERVICING TO QUALIFIED PERSONNEL.
250V FUSE OF THE SPECIFIED TYPE AND RATING. FOR CONTINUED FIRE PROTECTION. REPLACE FUSE ONLY WITH
NO OPERATOR SERVICEABLE COMPONENTS INSIDE.
GROUNDING CO NDUCTOR MUST BE CONNECTED TO GROUND.
AWG 24
STRIP GAUGE 10.0 mm
1
CH CONT 1
1
CH CONT 2
1
CH CONT 3
1
CH CONT 4
1
CH CONT 5
1
CH CONT 6
1
CH CONT 7
1
CH CONT 8
SER. NO. LB
2
1
FRAME CONT
GO / NG OUTPUT GPIB
RS232C
DISCONNECT POWER CORD
BEFORE REPLACING FUSE
50/60 Hz 180 VA MAX
AC
250V T 3.15A
REPLACE FUSE
115V
230V FUSE RATING AS SPECIFIED
WARNING
TO AVOID ELECTRIC SHOCK THE POWER CORD PROTECTIVE
DO NOT REMOVE COVERS. REFER SERVICING TO QUALIFIED PERSONNEL.
250V FUSE OF THE SPECIFIED TYPE AND RATING. FOR CONTINUED FIRE PROTECTION. REPLACE FUSE ONLY WITH
NO OPERATOR SERVICEABLE COMPONENTS INSIDE.
GROUNDING CO NDUCTOR MUST BE CONNECTED TO GROUND.
2
1
FRAME CONT
2
2
1
FRAME CONT
2
1
2
1
FRAME CONT
1
Output
Master
(FRM)
Output
Input
Input
Slave
(FRS)
Slave
(FRS)