GW Instek PEL-2000 Series User Manual - Manual (Page 251)

APPENDIX
251
Default Settings
Menu Item
CC Mode Mode: Static A/B Value: Min A
Rising Slew Rate: Max Falling Slew Rate: Max
CR Mode Mode: Static A Value: Max Ω
Rising Slew Rate: Max Falling Slew Rate: Max
CV Mode Response: Slow A Value: Max V
Curr Limit: Max A
Chan-
Protection OCP Level: Max OCP Setting: OFF
OVP Level: Max OVP Setting: OFF
OPP Level: Max OPP Setting: OFF
UVP Level: Off UVP Setting: Clear
Protection Clear: All
Chan- Other CC Vrange: High Von Voltage: 0V
Von Latch: Off Short Key: Toggle
CH CONT: OFF Independent: OFF
Load D-Time: 0.0s CCH Step: Min
CRH Step: Min CRL Step: Min
CV Step: Min
Chan- Seq.
Edit A Value: 0 Rising/Falling SlewRate:
Max
Duration Time: 0.001s
Chan- Seq.
Edit - Loop Repeat: Infinity Times Start of Loop: 001 Step
On End Load: OFF CC Vrange: High
Chan-
Go/NoGo Spec Test: Off Entry Mode: Value