GW Instek PEL-2000 Series User Manual - Manual (Page 63)

GETTING STARTED
63
Slew rate The slew rate is the rate at which the current will
increase to a set level. There are two slew rates:
rising slew rate & falling slew rate. In CC mode the
slew rate is defined as A/uS.
As can be seen above, the rising and falling slew
rate need not be the same.
Go/NoGo Using Go/NoGo, the Center, High and Low
voltage limits can be set for both Static and
Dynamic modes. A delay time of up to 1 second
can also be set.