GW Instek PEL-2000 Series User Manual - Manual (Page 168)

PEL-2000 Series User Manual
168
3. Press the Selector knob to edit
the selected value, then turn to
increase or decrease the value.
OR
Use the number pad to enter a
number.
4. Press the Selector knob or Enter
to confirm selection.
5. Repeat steps 3 to 5 to turn Von
Latch ON or OFF
For details about Von and Latch settings please see
page 81.
Note
The configuration settings only apply to the current
channel, other channels will not be affected.
Configuring the Short key
Background The Short Key is used to simulate a short circuit.
The Short key can be configured to toggle (press
SHORT on the load module to toggle ON or OFF)
or to Hold (the SHORT key is held to short the
load.
Parameter Short Key Hold/Toggle
Panel operation Ensure the menu is in the
configuration menu. See page 160.