GW Instek PEL-2000 Series User Manual - Manual (Page 125)

OPERATION
125
Panel Operation 1. Use the Selector knob to
highlight Level1.
03/02/09
10 : 30
CC
Dyna
High
Configure Configure
Mode
CC
Dynamic
CH1
Range
High
Main
2. Press the Selector knob to edit
the selected level, then turn to
increase or decrease the value.
OR
Use the number pad to enter a
number.
3. Press the Selector knob or Enter
to confirm selection.
4. Repeat steps 1-3 for the
remaining parameters.
Note
Level1 & Level2 can be set for both High and Low
Range.