GW Instek PEL-2000 Series User Manual - Manual (Page 127)

OPERATION
127
Panel Operation 1. Use the Selector knob to
highlight A Value.
03/02/09
10 : 30
CC
Static
High
Configure Configure
Mode
CC
Static
CH1
Range
High
Seq.
Edit
Main
2. Press the Selector knob to edit
the selected value, then turn to
increase or decrease the value.
OR
Use the number pad to enter a
number.
3. Press the selector knob or Enter
to confirm selection.
4. Repeat steps 1-3 for the
remaining parameters.
Note
A & B Value have the same Range: High or Low.