GW Instek PEL-2000 Series User Manual - Manual (Page 220)

PEL-2000 Series User Manual
220
Saving/Recalling Presets to USB
Background There are two options to save or recall Channel
Presets to a USB flash drive:
Save Chan Current: Saves the active Channel’s
Presets (P0~P9) into the default file path
(20XXX_XX.P).
Save Chan All: Every channel’s Presets (CH1 P0~P9
~ CH8 P0~P9) will be saved into a directory
(ALL00XX) as separate files for each channel
(P0X0X_C1.P ~ P0X0X_C8.P)
Recall: Recalls the selected file to the active
channel’s Presets (P0~P9). It is not possible to
update all the channels at once, only one channel at
a time can be recalled.
The file extension *.P is used for channel Presets
only.
For more information about the file structures see
page 89.
Parameter Save All Ch Directory: ALL0000 ~ ALL0099
File: P0X0X_CX.P
Save File File: 20XXX_XX.P
Update File File: 20XXX_XX.P
Panel operation 1. Insert a USB flash drive into the
front panel USB slot.
2. Ensure the USB path has been
set.
Page 208.