GW Instek PEL-2000 Series User Manual - Manual (Page 88)

PEL-2000 Series User Manual
88
Turning on the
Load A load is turned on when Load On input is set to
On (active low). A load is turned off when the Load
On input is set to Off (active high).
When a load is turned on from the channel control
interface, the load can be turned off from the
mainframe, local module and via remote control.
However the opposite is not true; when a load is
turned off using the channel control interface, the
load cannot be turned on via the mainframe, local
module or via remote control.
For connections and configurations, see pages 56
and 235 respectively.