GW Instek PEL-2000 Series User Manual - Manual (Page 156)

PEL-2000 Series User Manual
156
03/02/09
10 : 30
Configure
Seq.
Off
Save
Define
TRIG OUT
Note CH1is used as the trigger source. CH2 has CH
CONT set to external.
2. Use the Selector knob to
highlight a channel.
3. Press the Selector knob to edit
the channel, and then turn to
choose which channel’s Duration
Time Setting to import.
Range Ch 01~08 / OFF
4. Press the Selector knob or Enter
to confirm selection.
Trigger Out
Channel 5. Press Define TRIG OUT (F2) if
you want the currently selected
channel to output the Trigger
sequence signal.
6. Repeat for any other channel.