GW Instek PEL-2000 Series User Manual - Manual (Page 196)

PEL-2000 Series User Manual
196
Configuring RS232 Connection
Background When using RS232 a number of parameters need to
be set. These include Baud rate, Stop Bit and
Parity. When setting RS232 parameters, ensure
they match that of the host machine.
Parameters Baud Rate 2400/4800/9600/19200/38400
Stop Bit 1~2
Parity None/Odd/Even
Panel operation 1. Press the Shift Key then the Help
key to access the Utility menu.
2. Press F3(Interface Menu).
03/02/09
10 : 30
O
Configure Other
System
Info
Interface Time Set Load
USB
3. If the Interface mode is not
RS232, use the Selector knob to
edit Interface.
4. Choose RS232.