GW Instek PEL-2000 Series User Manual - Manual (Page 173)

OPERATION
173
Note
When a channel has been set to
independent, an asterisk will be shown
next to the channel number indicator in
the Current Operation Channel Status
panel.
The configuration settings only apply to
the current channel, other channels will
not be affected.
CC
Dyna
High
*CH1
Conf
Configuring the Load Delay Time
Background The mainframe can delay loading a channel by up
to 10 seconds. However the Delay Time is only
applicable for manual loading. Delay Time is not
applicable to Programs or Sequences.
Parameter Load D-Time 0~10 S
Panel operation Ensure the menu is the configuration
menu. See page 160.
1. Press the F2(Other) key to enter
the Other menu.