GW Instek PEL-2000 Series User Manual - Manual (Page 104)

PEL-2000 Series User Manual
104
Frame Link
Frame link connections are used connect up to four slave main
frames to a master main frame. When using frame link connections
it is possible to perform a number of operations in parallel under
the control of the master unit.
DUT
DUT
DUT
DUT
Step Description Details
1. Setup Connect the mainframes together. Page 54
2. Configure Configure the Frame CONT to ON
for all mainframes. Page 187
At first both the master and slaves are independent.
FRM (Frame Master) can be seen on the top panel of
the each mainframe. When a mainframe is connected
as a slave unit, the FRM icon will change to FRS (Frame
Slave). The front panel keys are disabled on slave units
when in slave mode (FRS).
Slave mode
Master/Independent
3. Program See the tutorial sections for
programming or channel
configuration. Pages 99, 101